DF-2 Volume Increaser | -Circuit Board For Your Own Assembly

Lead time on these is very short, as long as I have parts which I usually do. Only takes a day or two, and then it’ll be on it’s way!

Shipping your pedal around is expensive. If you’re comfortable soldering and cutting up wires, I can send you a circuit board and all the parts necessary to install your own volume booster circuit.

You’ll need:

Soldering Iron
Solder
Wire Cutters + Wire Strippers
BOSS DF-2
Tools for taking previously mentioned DF-2 apart

Parts included:

Circuit Board
1k, 4.7/6.8k, 1M resistors (one of each)
10k preset
TL072 opamp
2x 100n box capacitors
Lengths of coloured wire

All instructions are for free in my blog. If you can make your own circuit too, go for it!